Checking The Configuration; Maintaining Nac; Clearing The Statistics About 802.1X Authentication - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
mac-authen reauthenticate mac-address mac-address
A specified user who has passed MAC address authentication is re-authenticated.
If the user does not pass MAC address authentication, the user is not re-authenticated.
Step 3 Run:
mac-authen reauthenticate interface { interface-type interface-number1 [ to
interface-number2 ] } &<1-10>
MAC address re-authentication on a specified interface is enabled.
Step 4 Run:
interface interface-type interface-number
The interface view is displayed.
Step 5 Run:
mac-authen reauthenticate
MAC address re-authentication on a specified interface is enabled.
----End

2.5.10 Checking the Configuration

Prerequisite
The configurations of MAC address authentication are complete.
Procedure
l
l
----End

2.6 Maintaining NAC

This section describes how to clear statistics about NAC and debug NAC.

2.6.1 Clearing the Statistics About 802.1x Authentication

Issue 01 (2011-07-15)
Run the display mac-authen [ interface { interface-type interface-number1 [ to interface-
number2 ] } &<1-10> ] command to view the configuration of MAC address authentication.
Run the display mac-address { authen | guest } [ vlan vlan-id ] command to check the
configuration of 802.1x authentication and MAC address authentication or information
about the MAC address added to the guest VLAN.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 NAC Configuration
74