Configuring A Basic Acl6; Configuring An Advanced Acl6 - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security

10.4.4 Configuring a Basic ACL6

Basic ACL6s can classify data packets based on the source IP address.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
acl ipv6 [ number ] acl6-number
A basic ACL6 is created based on the number.
Or, run:
acl ipv6 name acl6-name [ advance | basic | acl6-number ]
A basic ACL6 is created based on the name.
The value of a basic ACL6 ranges from 2000 to 2999.
Step 3 Run:
rule [ rule-id ] { deny | permit } [ fragment |
address prefix-length | source-ipv6-address/prefix-length | source-ipv6-address
postfix postfix-length | any } | time-range time-name ]
The rule of the ACL6 is configured.
----End

10.4.5 Configuring an Advanced ACL6

Advanced ACL6s can classify data packets based on the source IP address, destination IP
address, source port number, destination port number, and protocol type.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
acl ipv6 [ number ] acl6-number
An advanced ACL6 is created based on the number.
Or, run:
acl ipv6 name acl6-name [ advance | basic | acl6-number ]
An advanced ACL6 is created based on the name.
The value of an advanced ACL6 ranges from 3000 to 3999.
Step 3 Perform the following steps as required to configure rules for the ACL6:
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 ACL Configuration
logging | source { source-ipv6-
*
235