Establishing The Configuration Task; Creating An Acl6 - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security

10.4.1 Establishing the Configuration Task

Establishing the Configuration Task of ACL6.
Applicable Environment
An ACL6 can be applied to the following tasks:
l
l
l
Pre-configuration Tasks
None
Data Preparation
To configure an ACL6, you need the following data.
No.
1
2
3

10.4.2 Creating an ACL6

You can create an ACL6 based on the number or name.
Context
To create an ACL, you need to specify a number to identify the ACL6 type. For example, the
ACL6 with the number ranging from 2000 to 2999 is a basic ACL6 and the ACL6 with the
number ranging from 3000 to 3999 is an advanced ACL6.
Procedure
l
Issue 01 (2011-07-15)
Configuring the packet filtering policy
Configuring policy-based routing
Configuring a routing policy
Data
Number or name of the ACL6
(Optional) Name of the time range during which the ACL6 is valid and the start time
and end time of the time range
Number of the ACL6 and the rule of identifying the packet type, including protocol
type, source address and source interface, destination address and destination
interface, ICMPv6 type and code, precedence, and ToS
Creating an ACL6 based on the number
1. Run:
system-view
The system view is displayed.
2. Run:
acl ipv6 [ number ] acl6-number
An ACL6 is created based on the number.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 ACL Configuration
233