Checking The Configuration - Huawei Quidway S3700 Series Configuration Manual

Hide thumbs Also See for Quidway S3700 Series:
Table of Contents

Advertisement

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
The retransmission count of the authentication request is set.
By default, the S3700 retransmits an authentication request to an access user twice.
----End

2.4.16 Checking the Configuration

Prerequisite
The configurations of 802.1x authentication are complete.
Procedure
l
l
----End
Example
View information about 802.1x authentication on GE 0/0/1.
<Quidway> display dot1x interface gigabitethernet 0/0/1
GigabitEthernet0/0/1 status: UP
bypass]
Port control type is Auto
Authentication method is MAC-based
Reauthentication is disabled
Maximum users: 256
Current users: 2
Authentication Success: 1
EAPOL Packets: TX
Sent
Received
View information about the MAC address used in 802.1x authentication or MAC address
authentication.
<Quidway> display mac-address authen
MAC address table of slot 0:
-------------------------------------------------------------------------------
MAC Address
-------------------------------------------------------------------------------
0000-0000-0100 3000
0000-0000-0200 3000
0000-0000-0600 3000
Issue 01 (2011-07-15)
Run the display dot1x [ statistics ] [ interface { interface-type interface-number1 [ to
interface-number2 ] } &<1-10> ] command to check the configuration of 802.1x
authentication.
Run the display mac-address { authen | guest } [ vlan vlan-id ] command to check the
configuration of 802.1x authentication and MAC address authentication or information
about the MAC address added to the guest VLAN.
: 24
EAPOL Request/Identity Packets
EAPOL Request/Challenge Packets : 1
Multicast Trigger Packets
DHCP Trigger Packets
EAPOL Success Packets
EAPOL Failure Packets
EAPOL Start Packets
EAPOL LogOff Packets
EAPOL Response/Identity Packets : 1
EAPOL Response/Challenge Packets: 1
VLAN/
VSI/SI
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
802.1x protocol is Enabled[mac-
Failure: 11
RX
: 4
: 11
: 0
: 0
: 1
: 11
: 2
: 0
PEVLAN CEVLAN Port
-
-
GE0/0/1
-
-
GE0/0/1
-
-
GE0/0/1
2 NAC Configuration
Type
LSP/LSR-ID
MAC-Tunnel
authen
-
authen
-
authen
-
67

Advertisement

Table of Contents
loading

Table of Contents