Checking The Configuration - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
The system view is displayed.
Step 2 (Optional) Run:
interface vlanif vlan-id
The VLANIF interface view is displayed.
Step 3 Run:
arp gratuitous-arp send enable
The function of sending gratuitous ARP packets is enabled.
By default, the function of sending gratuitous ARP packets is disabled.
Step 4 (Optional) Run:
arp gratuitous-arp send interval interval-time
The interval for sending gratuitous ARP packets is set.
By default, the interval for sending gratuitous ARP packets is 60 seconds.
----End

4.4.8 Checking the Configuration

Prerequisite
The configurations of ARP anti-attack.
Procedure
l
----End
Example
Run the display arp anti-attack configuration all command, and you can view the ARP anti-
attack configuration.
<Quidway> display arp anti-attack configuration all
ARP anti-attack packet-check function: disable
ARP gateway-duplicate anti-attack function: disabled
ARP anti-attack log-trap-timer: 0 seconds
(The log and trap timer of speed-limit, default is 0 and means disabled.)
ARP anti-attack entry-check mode:
Vlanif
-------------------------------------------------------------------------------
All
-------------------------------------------------------------------------------
ARP rate-limit configuration:
-------------------------------------------------------------------------------
Global configuration:
Issue 01 (2011-07-15)
Run the display arp anti-attack configuration { arp-rate-limit | arpmiss-rate-limit |
arp-speed-limit | arpmiss-speed-limit | entry-check | gateway-duplicate | log-trap-
timer | packet-check | all } and display arp anti-attack configuration check user-bind
interface interface-type interface-number commands to view the ARP anti-attack
configuration.
Mode
disabled
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 ARP Security Configuration
148