Optional) Setting The User Name Format For An Hwtacacs Server; Optional) Setting The Traffic Unit For An Hwtacacs Server - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
1.5.8 (Optional) Setting the User Name Format for an HWTACACS
Server
Context
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
hwtacacs-server template template-name
The HWTACACS server template view is displayed.
Step 3 Run:
hwtacacs-server user-name domain-included
The user name format is set for an HWTACACS server.
By default, a user name supported by an HWTACACS server contains the domain name. That
is, the S3700 sends the user name, domain name, and domain name delimiter to the RADIUS
server for authentication.
If an HWTACACS server does not accept the user name that contains the domain name, you
can use the undo hwtacacs-server user-name domain-included command to delete the domain
name before sending it to the HWTACACS server.
----End

1.5.9 (Optional) Setting the Traffic Unit for an HWTACACS Server

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
hwtacacs-server template template-name
The HWTACACS server template view is displayed.
Step 3 Run:
hwtacacs-server traffic-unit { byte | kbyte | mbyte | gbyte }
The traffic unit is set for an HWTACACS server.
Issue 01 (2011-07-15)
NOTE
A user name is in the user name@domain name format and the character string after "@" refers to the
domain name. In the user name, @ is the domain name delimiter. The domain name delimiter can also be
any of the following symbols: \ / : < > | ' %
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
22