Copy Settings To Other Device; Compare Settings - GE G30 Instruction Manual
Generator protection system 7.6x
Hide thumbs
Also See for G30:
- Instruction manual (698 pages) ,
- Communications manual (532 pages) ,
- Communications manual (526 pages)
Table of Contents
Advertisement
CHAPTER 11: MAINTENANCE
11.5 Copy settings to other device
Settings from one G30 device can be copied to another G30 device for rapid deployment. The order codes must match.
See the Settings File section at the beginning of the Interfaces chapter for a list of settings not deployed, such as IP
address.
To apply settings to another device:
1.
Right-click the device in the Online window and select the Add Device to Offline Window option. A window opens.
2.
Check the file path and name the file, then click the Receive button. An example is to save the files in
D:\Users\Public\Public Documents\GE Power Management\URPC\Data\ and to name the source device
G30_Deployment. At the prompt, confirm the action. The settings are saved in .cid, .icd, and .urs files, and the entry
displays in the Offline window area.
3.
Right-click the device in the Offline window area and select the Duplicate Device option. The device is copied with a
prefix of "Copy of." Multiple duplicates results in files being named "Copy of Copy of" for example, which can be
avoided by deleting the folder copies from the path shown on mouse-over.
4.
Right-click the copied device and rename it.
5.
Right-click the copied device and select the Edit Device Properties option. Make the changes for the new device.
6.
Send the file to new device by dragging and dropping it into the Online Window area. Or right-click and select the
Write Settings to Device option.
7.
Update the remaining settings, such as IP address.
11.6 Copy settings to other device
Settings from one G30 device can be copied to another G30 device for rapid deployment. The order codes must match.
See the Settings File section at the beginning of the Interfaces chapter for a list of settings not deployed, such as IP
address.
To apply settings to another device:
1.
Right-click the device in the Online window and select the Add Device to Offline Window option. A window opens.
2.
Check the file path and name the file, then click the Receive button. An example is to save the files in
D:\Users\Public\Public Documents\GE Power Management\URPC\Data\ and to name the source device
G30_Deployment. At the prompt, confirm the action. The settings are saved in .cid, .icd, and .urs files, and the entry
displays in the Offline window area.
3.
Right-click the device in the Offline window area and select the Duplicate Device option. The device is copied with a
prefix of "Copy of." Multiple duplicates results in files being named "Copy of Copy of" for example, which can be
avoided by deleting the folder copies from the path shown on mouse-over.
4.
Right-click the copied device and rename it.
5.
Right-click the copied device and select the Edit Device Properties option. Make the changes for the new device.
6.
Send the file to new device by dragging and dropping it into the Online Window area. Or right-click and select the
Write Settings to Device option.
7.
Update the remaining settings, such as IP address.
11.7 Compare settings
Settings are comparable against default values and between two UR devices.
G30 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUAL
COPY SETTINGS TO OTHER DEVICE
11-7
11
Advertisement
Table of Contents
