GE G30 Instruction Manual page 190

FLEXLOGIC DESIGN USING ENGINEER
4
The process is as follows:
• Modify or create a logic diagram in the Offline Window area of the EnerVista UR Setup software
• Compile it and troubleshoot any errors
• The logic populates automatically into the FlexLogic Equation Editor
• Upload the file to the live device
• Monitor the output
This section explains how to use Engineer. It outlines the following topics:
• Design logic
• Send file to and from device
• Monitor logic
• View front panel
• Generate connectivity report
• Preferences
4-62
Figure 4-65: Inputs triggering output in Engineer
G30 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 4: INTERFACES