Recalibration - Siemens SITRANS F MASS 2100 Operating Instructions Manual

Service and maintenance

9.2 Recalibration

NOTICE
Penetration of moisture into the device
Damage to device.
• Make sure when carrying out cleaning and maintenance work that no moisture penetrates
Leaks in the sample gas path
Risk of poisoning.
When measuring toxic process media, these can be released or collect in the device if there are
leaks in the sample gas path.
• Purge the device as described in Commissioning (Page 49).
• Dispose of the toxic process media displaced by purging in an environmentally friendly
Use of a computer in a hazardous area
If the interface to the computer is used in the hazardous area, there is a risk of explosion.
• Ensure that the atmosphere is explosion-free (hot work permit).
9.2 Recalibration
Siemens offers to recalibrate the sensor.
The following calibration types are offered as standard according to configuration:
• Standard mass flow calibration
• Density calibration
• Customer specified mass flow calibration
• Accredited Siemens ISO/IEC 17025 mass flow calibration
Note
SensorFlash
For sensor recalibration the SensorFlash memory unit must always be returned with the
sensor.
86
the inside of the device.
WARNING
manner.
WARNING
SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB