Table of Contents
Advertisement
Maintenance and service
7.1
Maintenance
The device is maintenance-free, however a periodic inspection according pertinent directives
and regulations must be carried out.
An inspection can include check of:
● Ambient conditions
● Seal integrity of the process connections, cable entries, and cover screws
● Reliability of power supply, lightning protection, and grounds
7.2
Transportation/storage
The sensor is a fragile piece of equipment. Impact and shock can
cause measuring inaccuracy. Therefore during transportation it
must be placed in the transportation box delivered by Siemens
Flow Instruments. If this is not possible, the alternative sensor
packaging must be able to withstand the hazards from
transportation.
7.3
Recalibration
Siemens Flow Instruments offers to recalibrate the sensor. The following calibrations are
offered as standard:
● Standard calibration
● Matched pair calibration
● Customer specified matched pair calibration (up to 10 points)
● Accredited matched pair calibration
SITRANS F C MC2
Operating Instructions, 10/2009, A5E02154544-02
Note
For recalibration the memory unit must always be returned with the sensor
7
27
Advertisement
Table of Contents
