Order Number Confirmation - YASKAWA MOTOMAN-MH5 Instructions Manual

171469-1CD
MH5
1.2
Fig. 1-1: Location of Order Number Labels
THE MANIPULATOR AND THE CONTROLLER
SHOULD HAVE SAME ORDER NUMBER.
ORDER NO.
DX100
TYPE ERDR-
POWER SUPPLY
3PHASE
INTERRUPT CURRENT
SERIAL No.
DATE
ORDER NO.
(a) DX100 (Front View)
1 Product Confirmation

1.2 Order Number Confirmation

Order Number Confirmation
Check that the order number of the manipulator corresponds to the
DX100/NXC100. The order number is located on a label as shown below.
Label (Enlarged View)
G
AC200V 50/60Hz PEAK kVA
AC220V 60Hz kVA
AVERAGE
kA
MADE IN JAPAN NJ2960-1
NJ1529
PROGRAMMING PENDANT
X8 1
1-2
Check that the manipulator
and the NX100 have the
same order number.
WARNING WARNING
HEAVY OBJECT HAZAARDOUS VOLTAGE
208/110 VAC PRESENT
Can cause muscle strain or
back injury. Use lifting aids Contact may cause
proper lifting technjques electric shock or burn
when removing or replacing Turn off and lock out
system power before servicing
ORDER. NO.
(b) NXC100 (Top View)
(c) Manipulator (Top View)
HW0485750
17 of 74