Wrist Flange - YASKAWA MOTOMAN-MH5 Instructions Manual

MH5
6.2
Fig. 6-2: Wrist Flange
6 Allowable Load for Wrist Axis and Wrist Flange

6.2 Wrist Flange

Wrist Flange
The wrist flange dimensions are shown in Fig. 6-2 "Wrist Flange".
It is recommended that the attachment be mounted inside the fitting in
order to identify the alignment marks. Fitting depth shall be 5 mm or less.
7
6
Wash off anti-corrosive paint (yellow) on the wrist flange
NOTE
surface with thinner or light oil before mounting the tools.
6-2
171469-1CD
+0.012
5 dia.
0
(depth: 7)
Tapped hole M5 (4 holes)
(depth: 9) (pitch: 0.8)
HW0485750
36 of 74