Symmetricom TimeSource 2500 Manual page 98

S S S S S S S
Procedure J. Power Up (cont'd)
Step
21 Choose a folder in the file system of your computer, enter a unique filename, and
click the Open button.
22 Wait until the TimeSource 2500 front panel Locked lamp is lit green (steady), and all
other lamps are off. (The system normally takes about 1 h to warm up, but may take
up to 8 h to warm up, depending on the antenna location and other site-dependent
specifics.)
23 The TimeSource 2500 System is now installed and providing Stratum 1 signals.
98
TimeSource 2500
S S S S S S S S S S S S S S
Action
S S S S S S S S S S S S