Symmetricom TimeSource 2500 Manual page 183

S S S S S S S S
Table R. Parameter Definitions (cont'd)
Parameter
condtype
This parameter is the condition type. It indicates the type of condition being
reported. Valid values are:
MODE
ERROR
LOS
AIS
STATE
date
This parameter is the current date in the 8 digit form yyyy-mm-dd, where yyyy is
year, mm is month (01–12), and dd is day (01–31).
modifier Same as aid.
ntfcncde
This parameter is the notification code which indicates the severity of the condition.
Valid values are:
ocrdat
This parameter is the date an event occurred.
ocrtm
This parameter is the time an event occurred.
sid This parameter is the source identifier (site ID). It identifies the system sending the
message and is the equipment's CLLI code. The sid is the same as the location on
the Installation screen.
S S S S S S S S
= the equipment is powering up or software downloading
= there is an error in one of the signals being ensembled
= there is a loss of one of the signals being ensembled
= there is an alarm indication signal being received on one of the ex-
ternal span inputs
= there is a problem with the GPS signal
CL = cleared
MJ = major alarm
MN = minor alarm
S S S S S S S S
Definitions
NA = not alarmed
NR = not reported
S S S S S S S S
183
Troubleshooting
S
2
3
5