Symmetricom TimeSource 2500 Manual page 50

S S S S S S S
Procedure C. Cable Installation–Maximum 100 Foot Cable
Step
1
Install the SMA-to-TNC adapter bracket to a wall within 10 ft of the antenna, using
user-supplied bolts or screws.
2 Install the SMA-to-TNC adapter in the adapter bracket installed in Step 1.
3 Attach one end of the RG-316 cable to the antenna.
4 Attach the other end of the RG-316 cable to the SMA end of the adapter installed in
Step 2.
5 Attach one end of the LMR-240 cable to the TNC end of the adapter installed in
Step 2.
6 Route the LMR-240 cable to the rear of where the TimeSource 2500 Shelf will be
installed.
7 Secure the RG-316 cable, using the adhesive-backed clip(s), so that no more than
10 ft of cable is left unsupported.
50
TimeSource 2500
S S S S S S S
Antenna-to-Shelf Distance Up to 100 Feet
To install the cables when the total length of the cable route is
between 40 feet and 100 feet, use cable kit 093-71240-10, and
follow Procedure C. Figure 14 shows the antenna-to-shelf cabling
for this configuration.
S S S S S S S
Action
S S S S S S S S S S S S