Operation - Symmetricom TimeSource 2500 Manual

S S S S S S S S
View GPS Satellite Information (cont'd)
3. To start or stop the log file for
this screen, select Log Data To File.
Data from the screen is written
to the file every 60 seconds
while the box is checked. The
log file may be opened and read
during the logging process;
however, the log file is read-only
during the logging process. The
log file is written to the host
computer disk in a comma-
delimited (.csv) data format.
4. View the latitude and longitude
of the TimeSource 2500.
5. View the altitude (in feet) of the
TimeSource 2500.
6. View the Universal Coordinated
Time.
7. View the GPS receiver system
mode of operation, as determined
by the system. Time XFR indicates
four or more satellites are in view
of the TimeSource 2500. No Fix
indicates less than four satellites are
in view of the TimeSource 2500.
S S S S S S S S
3
S S S S S S S S
4
S S S S S S S S
5
6
7
133

Operation

S
4
4