Symmetricom TimeSource 2500 Manual page 91

S S S S S S S S
Procedure J. Power Up (cont'd)
Step
9 Enter the user name and password for this installation, then click the OK button. A
screen appears showing the version number, copyright date, and the serial port that
communicates with the TimeSource 2500 (shown below).
Notes:
1. The user name, "default1", is set at the factory, and the password, "TS2500:", is
set at the factory.
2. The user name and password are case-sensitive.
3. If an incorrect user name and password are entered three consecutive times, the
BTMONitor application exits and ends the attempted session. If this happens, re-
open the application, and enter the correct user name and password.
S S S S S S S S S S S S S S S S
Action
S S S S S S S S
91
Installation
S
3
3
4
5