Symmetricom TimeSource 2500 Manual page 97

S S S S S S S S
Procedure J. Power Up (cont'd)
Step
19 When the parameters are set as desired, click the Save to TimeSource button to save
the information on this screen to the TimeSource 2500. A dialog box appears to
confirm the action (see below). Click Yes to save the parameters to the
TimeSource 2500.
20 Click the Save to File button to save the contents of the screen to a file on a disk
using a standard Windows File Save dialog box (shown below).
Note:
Saving the Installation screen information to a file may be useful for reinitializ-
ing the TimeSource 2500 if the unit loses critical memory or is taken out of service.
S S S S S S S S S S S S S S S S
Action
S S S S S S S S
97
Installation
S
3
3
4
5