Enable Or Disable Inputs - Symmetricom TimeSource 2500 Manual

S S S S S S S S

Enable or Disable Inputs

1. Select Configuration > Provision
> Inputs.
2. To enable (provision) or disable
monitoring of an input, select or
de-select any of the input source(s).
Caution:
Do not select an unused
input, otherwise, spurious alarms will
be generated.
Note:
An input must be
provisioned before it can be
ensembled.
3. To restore the factory settings,
select Restore Defaults.
4. To save the input selections,
click OK. To ignore any changed
information, click Cancel.
S S S S S S S S S S S S S S S S
1
2
3
S S S S S S S S
4 4
123
Operation
S
4
4