Cabling Considerations; Window Antenna - Symmetricom TimeSource 2500 Manual

S S S S S S S

Cabling Considerations

Window Antenna

26
TimeSource 2500
S S S S S S S
The antenna assembly uses the same coaxial cable for power and
antenna signals.
Warning:
Avoid small-radius turns and any unnecessary turns.
The minimum radius of any bend must be six times the
diameter of the cable.
Cables must be run as straight as possible. All cables should be
routed and dressed in accordance with standard company
practices.
For TimeSource 2500 Systems with window antennas, use this
section, and skip the "Wall Antenna" section. For TimeSource
2500 Systems with wall antennas, skip this section, and use the
"Wall Antenna" section.
Caution:
The antenna, when attached to the window, cannot reliably
support more than 10 feet of RG-316 cable. Be sure the cable is sup-
ported within 10 feet of the antenna. Clips are supplied in the win-
dow antenna kit, to support the RG-316 cable. In addition, cable
mounting brackets are included in cable kits 093-71240-10, 093-
71400-15, and 093-71400-20, for supporting the LMR-240 and LMR-
400 cable.
S S S S S S S S S S S S S S S S S S S