Power-Up - Symmetricom TimeSource 2500 Manual

S S S S S S S

Power-Up

Procedure J. Power Up
Step
1
Locate a directory, or create a new directory, on your hard disk, to store the
BTMONitor application.
2 Copy the files from the BTMONitor disk to the directory.
3 Create a Windows shortcut to BTMONitor, and place the shortcut on the Windows
Desktop. One method to accomplish this is to open Windows Explorer in an
unmaximized window with some of the Desktop visible around it. Then, navigate to
the BTMONitor file and drag the file to the Desktop. Click OK if Windows asks to
make a shortcut file.
4 Connect the supplied serial communications cable between the TimeSource 2500
Craft connector and a serial communications port on the computer.
5 Install fuses in the fuse panel that powers the TimeSource 2500. On the front panel,
when the Minor Alarm lamp is yellow, and the Locked lamp is blinking green,
continue.
88
TimeSource 2500
S S S S S S S
Use Procedure J to install BTMONitor at a site where the host
computer is connected to the Craft connector of the TimeSource
2500 with a cable, and set up BTMONitor.
S S S S S S S
Action
S S S S S S S S S S S S