Tod Output; Btmonitor Software; Alarm Interface - Symmetricom TimeSource 2500 Manual

S S S S S S S

BTMONitor Software

Alarm Interface

22
TimeSource 2500
S S S S S S S

TOD Output

The BesTime Ensemble Timing Generator provides the timing for
the TOD timing signal available at the TOD connector, which
provides time code to devices compatible with NTP Type 4 or Cisco
format. A 1 pps signal is also available at the TOD connector.
BTMONitor (BesTime Monitoring) is a Windows 95/98/NT
compatible craft software program, which provides system
configuration, alarms, and diagnostics. BTMONitor resides on a
user-provided PC, and interfaces to the TimeSource 2500 Shelf via
the local (Craft) RJ-45 or remote (Remote) RS-232 communication
port.
The MPU delivers major and minor alarms to dry-contact type
connections at the Alarms connector. Alarms are also indicated by
the front-panel status lamps, BTMONitor application, which
provides extensive reports of alarm and status, and TL1 messages
reported via the Craft communication port.
S S S S S S S S S S S S S S S S S S S