Symmetricom TimeSource 2500 Manual page 63

S S S S S S S S
Antenna-to-Shelf Distance Up to 150 Feet or 200 Feet
To install the cables when the total length of the cable route is
between 100 feet and 150 feet, use cable kit 093-71401-15, follow
Procedure H, and refer to Figure 21. Figure 21 shows the antenna-
to-shelf cabling for this configuration.
To install the cables when the total length of the cable route is
between 150 feet and 200 feet, use cable kit 093-71401-20, follow
Procedure H, and refer to Figure 22. Figure 22 shows the antenna-
to-shelf cabling for this configuration.
Procedure H. Cable Installation–Maximum 150 Foot or 200 Foot Cable
Step
1
Install one of the N-to-N adapter brackets to the inside wall within 6 ft of the
antenna, using user-supplied bolts or screws.
2 Install one of the N-to-N adapters in the adapter bracket installed in Step 1.
3 For a wall-mounted shelf, install the other N-to-N adapter bracket to a wall within
6 ft of the TimeSource 2500 Shelf, using user-supplied bolts or screws.
For a rack-mounted shelf, the other N-to-N adapter mounting bracket may be
mounted to the rack instead of the wall.
4 Install the other N-to-N adapter in the adapter bracket installed in Step 3.
5 Push one of the LMR-240 antenna cables through the hole drilled in the wall for the
antenna cable, routing the TNC end of the cable to the antenna (see Figure 18).
6 Attach the TNC end of the LMR-240 cable to the antenna.
S S S S S S S S S S S S S S S S
Action
S S S S S S S S
63
Installation
S
3
3
4
5