Power Supply Events - Symmetricom TimeHub 5500 Reference Manual

Table 5-2. Message Troubleshooting (Continued)
Error Message
Event Code Condition
Description
SWDL Software
download mode
Active
SNTRCK Tracking this
1
input
Note:
1
This alarm can be set to other severities using the Edit Equipment (ED-EQPT) command.
Note: If the measurement card or clock card are upgraded (using
THWARP tool) to firmware load R4328D or later version, the events
will not default to the new Alarm Severity. The Alarm Severity prior to
the software download will be assigned.

Power Supply Events

The following examples show how the AIDs "PWRA" and "PRWB" appear in
automatic messages when firmware version 4328D is installed.
Note: If the Management card contains firmware version 4328D, the
AIDs for power supply related events are 'PWRA' or 'PWRB' for both
the Main shelf and Expansion shelves (See
Type, on page 69 for information on the RTRV-NETYPE-ALL
command to display the firmware version).
SNDKCAQO05050501 03-03-13 11:45:06
** 0246 REPT ALM EQPT
"S0-PWRA:MJ,SNPWRA,NSA,03-13, 11:45:06:\"Power Supply A
failed\""
The following is an example of power being re-supplied to power terminal A on the
main shelf:
SNDKCAQO05050501 03-03-13 11:45:14
A 0282 REPT ALM EQPT
097-55501-02 Issue 7 – January, 2005
Meaning
Software download mode is
active in IMC or Clock cards.
The Clock card has begun
tracking the indicated input.
Troubleshooting
Troubleshooting with Error Messages
Action
Normal event.
None required.
Retrieve Equipment
TimeHub 5500 TL1 Reference Guide 205