Tips For Self-Help In The Case Of Faults - Meiko FV 40.2 Operating Instructions Manual

Operating instructions FV 40.2 / FV 40.2 G / FV 60.2
Datei:1_FV40_60-2_9546822_Betriebsanleitung_EN_2004-03.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1174
12

Tips for self-help in the case of faults

Fault:
Machine does not fill.
Rinse water does not
spray!
Stripes and smears on the
dishes!
Formation of a significant
amount of foam in the
wash tank!
Update: 2008-03-10
W e reserve the right to change execution and construction!
Remedy
• No water available
• Dirt trap blocked
• Level switch defective
• Solenoid valve defective
• Door safeguard defective
• No water available
• Dirt trap blocked
• Solenoid valve defective
• Booster pump has failed
• Fresh water rinse system furred
• Rinse water mineral content too high (see operating
instructions)
• If this is observed only at particular times, check water
softener for regeneration. This must not carried out
during the dishwashing operation.
• Water pre-treatment defective or not carried out
• Different water type depending on the waterworks
• Unsuitable rinse aid products or wrong dosage
quantity
• Detergent for dish-washing by hand enters the wash
tank because of pre-cleaning the dishes
• Daily cleaning is carried out with foaming cleansing
agents which afterwards enter the machine.
• Improve pre-wash, as too much food residue is
entering the tank. Alternatively, empty wash tanks
between uses.
• Rinse water quantity too low
• Detergent or rinse aid product not suitable
• Temperatures too low < 40°C
S. „FV 40 G"
21/42
9544094