Parameter List - Meiko FV 40.2 Operating Instructions Manual

Operating instructions FV 40.2 / FV 40.2 G / FV 60.2

15.4 Parameter list

Par. Configuration
No. options
101 Wash program
Key 1
102 Wash program
Key 2
103 Wash program
Key 3
104 Rinse agent
Dosing quantity
105 Rinse program
Dosing quantity
106 Hardness degree
107 Beep ON/OFF
108 Mode
"Clear" display
109 Partial / full
desalination
available?
110 Hardness litres
per cartridge type
111 Total Operation
time
Indication
112 Total number of
wash cycles
113 Total number of
wash cycles since
last reset
114 Serial number
Datei:1_FV40_60-2_9546822_Betriebsanleitung_EN_2004-03.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1174
Use as value
range
Parameters 1 .. 50
Parameters 1 .. 50
Parameters 1 .. 50
Parameters 0.10 .. 1.00
Parameters 0.1...
20.0
Parameters 0 .. 50
Parameters 0/1
Parameters 0/1
Parameters 0,1,2
Parameters 0 .. 250
Indication 5 figures
Indication 5 figures
Indication 5 figures
Indication 8 figures
Update: 2008-03-10
W e reserve the right to change execution and construction!
Unit Factory
setting
- 1 Allocate the wash program to the
key 1
Assignment adjustable
- 2 Allocate the wash program to the
key 2
Assignment adjustable
- 5 Allocate the wash program to the
key 3
Assignment adjustable
ml/Liter 0.2 Value can be read from the rinse
water aid container label (dependant on
water quality)
ml/Liter 2.0 Value can be read from the
water detergent container label
(dependant on water quality)
[°dH] 0 The quantity of soft water available
between two regenerations
depends on
the hardness of the water.
- 1 Switch on/off acoustic ready
message
- "Clear" display
0: via INFO 420, 520
1: display of special characters
- Partial / full desalination available?
0: NO
1: partial demineralisation (TE)
2: full desalination (VE)
1000 L When the cartridge's capacity is
reached (hardness litres/degree of
hardness), "Replace Cartridge" will
be displayed
(INFO 725) (only in the case of
TE)
h Operation time
query only
- Wash cycles/loads,
query only
- Wash cycles/loads,
re-setting possible
- Option for calling up works
parameters
S. „FV 40 G"
Note
29/42
9544094