Operating instructions dishwashing machine model K-Tronic
Datei:BA-K-tronic_MIKE_9626212_EN_2005-12-01.doc
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
12
Tips for self-help in the case of faults
Fault:
Machine does not fill
Fault:
Rinse water does not
spray
Fault:
Vapours drains
Fault:
Stripes and smears on the
dishes
W e reserv e the right to change execution and construction !
Remedy
No water available
Dirt trap blocked
Level electrode / float valve soiled
Solenoid valve defective
Remedy
No water available
Dirt trap blocked
Solenoid valve defective
If the appliance has automatic water conservation, the
conservation grid switch / timing switch is defective
Fresh water rinse system furred
Built-in reverse osmosis installation broke down
Remedy
Extraction broke down
Curtains missing
Temperatures too high
Wash arms, drying nozzles, air guide plates bent or not
correctly inserted
Remedy
Rinse water mineral content too high (see operating
instructions)
If this is observed only at particular times, check water
softener for regeneration. This must not carried out
during the dishwashing operation.
Water pre-treatment defective or not carried out
Different water type depending on the waterworks
Unsuitable rinse aid products or wrong dosage quantity
Incorrectly fitted or missing curtains
Oversize containers previously washed causing
detergent to be transferred into following tanks
Too fast conveyor speed
30/44
9626212