Table of Contents
Advertisement
Loader Float Magnet Removal
and Installation
The tools required for loader float magnet removal
and installations are listed in Table 8-1. Use manu-
facturer-recommended tools whenever possible.
Table 8-1
Required Tools
Screwdriver
Open End Wrench
Allen Wrench
Loader Float Magnet Removal
Pull the
Boot Up
Figure 8-6
2. Remove the rubber boot from the base of the
joystick and pull the boot up. (fig. 8-6)
Figure 8-7
3. Locate the loader float magnet at the front of the
control. (fig. 8-7)
8. Loader/Transmission Controls Disassembly and Assembly
Loader Float
Magnet
8-3
Figure 8-8
4. The loader float magnet is held in place by an
Allen screw at the bottom of the magnet. Re-
move this screw. (fig. 8-8)
Figure 8-9
14. Remove the loader float magnet. (fig. 8-9)
Loader Float Magnet Installation
Figure 8-10
1. Position the loader float magnet at the front of
the control. (fig. 8-12)
Compact Track Loader
Remove
Screw
Remove
Magnet
Position
Magnet
Advertisement
Table of Contents
