Table of Contents
Advertisement
Figure 9-6
Figure 9-7
8. Remove the split flange and lay the inlet tube
aside. Remove the 2 bolts that mount the charge
pump to the auxiliary pump, then remove the
charge pump as shown below. (fig. 9-6, 9-7)
9. Transmission and Drive Disassembly and Assembly
Remove split
flange
9-3
Auxiliary Pump Removal
Figure 9-8
1. Disconnect all hoses from auxiliary pump.
(fig. 9-8)
Pump support bolt
Figure 9-9
2. Loosen (remove) the pump support bolt. You
must first loosen the jam nut near the engine in or-
der to do so. (fig. 9-9)
Figure 9-10
3. Remove the two bolts that mount the auxiliary
pump to the tandem drive pump, then remove the
pump as shown. (fig. 9-10)
Compact Track Loader
Advertisement
Table of Contents
