Table of Contents
Advertisement
Compact Track Loader
7. Radiator/Oil Cooler Disassembly and Assembly
Fan Guard Removal
Figure 7-1
1. Remove the bolts that secure the fan guard to
the fan shroud. (fig. 7-1)
Figure 7-2
2. Remove the fan guard from the engine com-
partment. Fig. 7-2)
Fan Guard Installation
1. Position the fan guard over the fan and against
the fan shroud.
2. Install the capscrews that secure the fan guard
to the fan guard mounts.
3. Make sure there is proper clearance between
the fan guard and the fan.
Fan Removal
The tools required for radiator/cooler removal and
installations are listed below. Use manufacturer-
recommended tools whenever possible.
Required Tools
Combination Wrench
Socket Wrench
Screwdriver
1. Remove the fan guard as described above. (fig.
7-1)
Figure 7-3
2. Disconnect the air supply from fan by holding
fitting with one wrench and loosening with
another wrench as shown. (fig. 7-3)
Figure 7-4
3. Remove the six fasteners that secure the fan to
the adapter flange. Carefully lift and remove the
fan from the machine. (fig. 7-4)
Fan Installation
1. To install the fan, reverse the removal proce-
dure.
7-2
Advertisement
Table of Contents
