Lift Arm Float Magnet; Removal; Installation - Terex ASV SR70 Service & Repair Manual

10-7
10. Remove the fittings on the back of the joystick (lift
arm control joystick only). (fig. 10-7)
10-8
11. Remove the bolts and nuts securing the joystick to
the mounting bracket. (fig. 10-8)
10-9
12. Lift the joystick through the opening in the bracket
and remove it from the machine. (fig. 10-9)

Installation

1. To install the joystick, reverse the removal proce-
dure.

Lift Arm Float Magnet

Removal

Required Tools
Fittings
Socket Wrench
Combination/Open End Wrench
Allen Wrench
1. Perform steps 3, 4 and 11 of the lift arm joystick
control removal process.
10-10
2. Remove the allen bolt from the underside of the
magnet. (fig. 10-10)
3. Disconnect the magnet harness connector from
the machine.
10-11
4. Lift the joystick within the bracket slightly, then pull
the magnet harness and connector through the
bracket past the joystick to remove it. (fig. 10-11)
Installation
1. To install the float magnet, reverse the removal
procedure.
10-3
https://tractormanualz.com/
Rubber Track Loader
10. Lift-Arm/Drive Controls