Table of Contents
Advertisement
Remove Exhaust
Pipe
Figure 6-5
3. Loosen up the cross over tube on both ends,
where it enters each fuel tank. Fig. 6-6, 6-7)
Cross-over Tube
Cross-over Tube
Fitting, Left Side
Fitting, Left Side
Figure 6-6
Cross-over Tube
Fitting, Right Side
Figure 6-7
6. Chassis Disassembly and Assembly
4. Disconnect the wires to the fuel sending unit on
the right side tank. (fig. 6-8)
Sending Unit
Wires
Figure 6-8
5. Remove the fuel tank mounting bolts, vent and
return hoses on each tank, then use a floor jack to
lower the tanks slowly and remove. (fig. 6-9)
Remove Mounting
bolts
Figure 6-9
6. Once a fuel tank has been removed, the cross
over tube can be removed from a hole on either side
of the frame.
Fuel Tank Installation
1. To install fuel tank, reverse the removal
procedure.
6-3
Compact Track Loader
Advertisement
Table of Contents
