Table of Contents
Advertisement
Compact Track Loader
8. Loader/Transmission Controls Disassembly and Assembly
Hot oil can cause personal injury. Lower any
attachments and make sure the oil is cool before re-
moving any components or lines.
1. Raise the lift arms and cab according to Tilt-Up
Canopy procedure on page 11-5 of this manual.
Figure 8-1
2. Disconnect the throttle linkage from the throttle
handle. (fig.8-1)
Figure 8-2
Figure 8-3
3. Remove mounting screws from the plastic
console. (fig. 8-2, 8-3)
Figure 8-4
4. Remove console from joystick tower. (fig. 8-4)
Figure 8-5
5. Make sure the hoses are labeled before remov-
ing to aid in reinstalling. Remove the hoses and
disconnect the wiring harness from the joystick
6. Unbolt the joystick from the joystick tower and
remove.
Joystick Installation
1. To install joystick, reverse the removal
procedure.
8-2
Advertisement
Table of Contents
