1MRK 502 073-UEN A
7.8
Generator protection REG670 2.2 IEC and Injection equipment REX060, REX061, REX062
Commissioning manual
Calibrating injection based 100% stator earth fault protection
•
In the short cut menu, right click and select Delete report.
•
Click the Delete report button in the upper right corner of the auditing
screen.
•
Select a record with the mouse cursor then press the Delete key on the
keyboard.
5.
Generate logs in one of the following ways:
•
In the short cut menu, right click and select Generate log.
•
Click the Generate log button.
Besides generating a report you can also generate a log file with the same
information as for the report. Open and see the details of the file in Notepad
or MS Excel.
After a successful generation of the log, the system confirms with a message
along with the path of the log file.
Editing features in graph
You can do the following operations on the graph during calibration,
commissioning and monitoring:
•
Zoom in
•
Zoom out
•
Cancel zoom
•
Enable X-zooming
•
Enable Y-zooming
1.
Zoom in one of the following ways:
•
Right click a graph and select Zoom in or Zoom out in the shortcut
menu.
GUID-3F080E48-8B77-48A0-8283-89511E1AE50B V1 EN-US
Figure 26:
•
Use the mouse to zoom in and select a part of the graph area.
Zooming via the shortcut menu
Section 7
GUID-B2784230-2355-4D4A-AAF0-34864C8D3190 v1
IEC11000051-1-en.vsd
87