Run A Software Update - KaVo MASTERsurg LUX Wireless Instructions For Use Manual

9 Run a software update

Please proceed as follows to update the software:
▶ Download the current firmware file from www.kavo.de/produkte.
▶ Copy the firmware file to an SD card (storage capacity 1 - 32 GB, FAT format).
▶ Turn the device off.
▶ Insert the SD card with the new firmware file into the unit. Make sure that only a
single firmware file with the .bin file extension (the downloaded current file) is
stored on the SD card.
▶ Turn the device on.
ð
The update process starts automatically.
Note
The unit must not be turned off during the update process.
After the update process, the unit starts using the updated software.
Malfunctions of the unit.
The software version displayed on the start screen or in the version display must co-
incide with the software version that was downloaded. If these do not coincide or if
there is any other error, please contact Customer Service.
See also:
2 5.2.17 Version, Page 37
Note
All program and device settings remain unchanged.
Instructions for use MASTERsurg LUX Wireless REF 1.009.1200
WARNING
67 / 76
9 Run a software update