Setting The Transmission Ratio; Rinsing Function; Manual Rinsing Function - KaVo MASTERsurg LUX Wireless Instructions For Use Manual

Instructions for use MASTERsurg LUX Wireless REF 1.009.1200
5 Operation | 5.7 Rinsing function
The direction of motor rotation can be changed during the treatment using the direc-
tion of motor rotation key of the wireless foot control. The changed direction of motor
rotation is shown on the display. For safety reasons, running in counterclockwise dir-
ection is not saved.
See also:
2 5.11 Wireless foot control, Page 52
Three audible signals indicate counterclockwise rotation. When the motor starts up, 3
more audible signals are issued.
Note
The set torque automatically increases by 5 Ncm. The maximum torque of the se-
lected activity cannot be exceeded.

5.6.5 Setting the transmission ratio

▶ Touch the transmission ratio display to set the value as desired.
The value is saved automatically.
See also:
2 Example 2: Program steps that do not include the activity, "Cut thread", and in-
clude the "Rinsing function" activity, Page 42

5.7 Rinsing function

5.7.1 Manual rinsing function

48 / 76