Removing The Straight Or Contra-Angle Handpiece; Setting-Up Multi-Program Mode - KaVo MASTERsurg LUX Wireless Instructions For Use Manual

5.3.2 Removing the straight or contra-angle handpiece

Damage from changing the straight and contra-angle handpieces during operation.
Wear to the catch on the straight and contra-angle handpiece and motor.
Unbalanced motor axis.
▶ Change the straight and contra-angle handpieces only when the motor is not run-
ning.
▶ Pull the coolant hose off the straight or contra-angle handpiece.
▶ Twist the straight or contra-angle handpiece slightly to pull it off.

5.4 Setting-up multi-program mode

A total of 10 programs are available to the user. These can be assigned, e.g., to vari-
ous users or implant systems. Each program includes 4 to 10 program steps and/or
activities.
After start-up, an overview of the 10 programs is displayed.
▶ Changing page. Programs 1 to 5 on page 1; programs 6 to 10 on page 2
▶ Changing the name of the selected program.
▶ Deleting a program and/or resetting program settings and name to factory set-
tings.
▶ Run selected program.
Multi-program mode can be disabled in the device settings here.
Note
In One-program mode, changes to settings become effective in program 1 (topmost
program on page 1).
Instructions for use MASTERsurg LUX Wireless REF 1.009.1200
5 Operation | 5.4 Setting-up multi-program mode
CAUTION
39 / 76