▶ Remove the hose set from the unit and discard it.
6.3 Disconnecting the surgical motor
▶ Disconnect the plug of the motor cable from the connector on the device. Make
sure to grasp the plug as close to the device as possible.
Note
Cleaning and disinfecting the motor connected with the motor lead.
See also:
2 Instructions for use INTRA LUX S600 LED
6.4 Decommissioning the wireless foot control
▶ Pull the clip out of the wireless foot control.
Instructions for use MASTERsurg LUX Wireless REF 1.009.1200
6 Decommissioning | 6.3 Disconnecting the surgical motor
55 / 76