Connecting To A Pel - AEMC PEL 102 User Manual

4.2 Connecting to a PEL

To connect to a PEL, perform the following steps:
1. Connect the power cord to an AC outlet. The instrument will power on.
2. If you are connecting via USB, connect the supplied USB cable to the PEL and the PC. Wait for the drivers to finish
installing before proceeding.
3. Open the PEL Control Panel by double-clicking the PEL icon
installation.
The Control Panel will be displayed:
4. To connect to an instrument and open the Add an Instrument Wizard dialog box, perform one of the following:
■
From the Instrument menu,
select Add an Instrument.
Figure 40
48
, located on the desktop, that was created during
Figure 39
■
From the Toolbar, click on the Add an Instrument icon.
or
Power & Energy Logger Model PEL 102 and PEL 103
Figure 41