Table of Contents
Advertisement
Installing PEL Control Panel
The latest PEL Control Panel is available on the USB stick provided with the
instrument and can also be found online at www.aemc.com.
■
Connect the provided USB stick or download the PEL Control Panel.
■
Launch setup.exe.
Then, follow the installation instructions on the screen.
■
Refer to the user manual for full installation details.
Connecting the Device to the PC
■
Connect the PEL's voltage inputs to wall power. The device will turn on.
■
Enable the Wi-Fi access point,
configuration menu
NOTE: For the Wi-Fi to operate, the battery must be sufficiently
charged (
■
Connect the PEL to your PC via Wi-Fi.
Double-click the PEL icon
■
Panel.
Select the Add device
■
WiFi in access point.
■
When the connection with the device is established, its name should be
displayed on the left side of the window in the PEL Network folder tree.
Refer to the User Manual operating instructions for a
Device Configuration
To configure your PEL, select the device in the PEL network.
Open the Configure Device dialogue box by clicking the Configure
in the toolbar, Device menu, or Status area.
This dialogue box has several tabs:
The General tab can be used to give the device a name, set the automatic
■
turn off delay, choose the refreshing of maximum values, lock the device's
Select / Control button, prevent battery charging on measurement, set a
device configuration password, set date and time, format the SD card, and more.
■
The Communication tab is used for options relating to the Wi-Fi connection.
The Measurement tab can be used to select the distribution system.
■
The Current Sensors tab can be used to select the transformation ratio of
■
the current sensors and the number of turns, if necessary.
The Recording tab can be used to select recording parameters.
■
The Meters tab can be used to reset the energy meters to zero.
■
Click OK to load the new configuration into the device.
10
.
or
).
on the desktop to open the PEL Control
icon on the toolbar. Then, select PEL 52 and
Power & Energy Logger Model PEL 52 - Quick Start Guide
WIFI AP, of the device in the
WIFI ST connection.
icon
Advertisement
Table of Contents
