Usb Connection - AEMC PEL 102 User Manual

4.2.2 USB Connection

The simplest and easiest connection to establish is a USB connection and is recommended when first learn-
ing how to use the PEL and PEL Control Panel.
The USB connection dialog box will list all of the USB instruments that are currently connected to the computer.
Before continuing, make sure an instrument is connected to your computer using the supplied USB cable.
■ From the Instrument drop-down list, select the desired instrument, then select the Next button.
■
If a successful connection was established, the Finish button will be enabled. Click Finish to exit the Wizard.
NOTE: If a connection with the instrument cannot be established, the Finish button will remain disabled and the
operation will need to be canceled. Verify that the instrument is connected with the desired communication medium
and repeat the Add an Instrument process.
50
Figure 43
Figure 44
Power & Energy Logger Model PEL 102 and PEL 103