4.4.3 Measurement Tab Options
The Measurement tab of the Configure Instrument dialog box specifies the electrical distribution system, voltage ratios,
nominal frequency and current probe options.
Distribution system:
■
A box listing each of the distribution systems supported by the instrument (see §3.6 for available distribution
systems descriptions).
■
An image is displayed to the right of the list illustrating the connection diagram for the selected distribution
system.
Selection of DC 2-, 3- or 4-Wire implies DC measurements only. Selection of other distribution systems implies AC mea-
surements only.
Load/Source:
These radio buttons determine whether or not the measurement applies to the system's load or to the source. By default,
Load is selected.
62
Figure 57
Power & Energy Logger Model PEL 102 and PEL 103