2.10 LCD Display (PEL 103)
1
2
3
1
Measured phase indicator.
2
Bargraph (Load factor - Min - Max). The bargraph indicates the percentage (0% to 100%) of full range or full load as
programmed into the PEL by the user through the DataView
3
Measurements or page title.
4
Measurement values.
5
Measurement units.
Top and bottom display bars indicate the following:
DESCRIPTION
ICON
Phase Sequence reversal indicator or missing phase (displayed only in Real-Time Measurement Mode)
Data are available for recording (non-display indicates possible internal problem)
Power quadrant indicator
Real-time Measurement Mode
Power and Energy Mode
Harmonics Mode
Max Mode
Information Mode
Configuration Mode
Power & Energy Logger Model PEL 102 and PEL 103
Figure 7
software.
®
Table 2
4
5
13