4. PEL CONTROL PANEL - DATAVIEW
For contextual information on using DataView, refer to the Help Menu within the software.
4.1 Installing DataView
DO NOT CONNECT THE INSTRUMENT TO THE PC BEFORE INSTALLING THE SOFTWARE AND DRIVERS.
1. Insert the USB stick into an available USB port (wait for driver to be installed).
2. If Autorun is enabled then an AutoPlay window should appear as shown.
NOTE: If Autorun is disabled, it will be necessary to open Windows Explorer, then locate and open the USB stick
drive labeled "DataView" to view the files on the drive.
3. In the AutoPlay window, select "Open folder to view files".
4. Double-click on Setup.exe from the opened folder view to launch the DataView setup program.
NOTE: If installing onto a Vista based computer the User Account Control dialog box will be displayed. Select the
Allow option to proceed.
2. A Set-up window, similar to the one below, will appear.
42
Figure 29
Power & Energy Logger Model PEL 102 and PEL 103
SOFTWARE
®