4.4.8 Modifying an Instrument's Configuration
To change or modify the instrument's configuration, select the desired PEL listed in the PEL Network, then select the
Modify Instrument Configuration button (
4.5 Downloading Recorded Data
Recorded measurements stored in the instrument are transferred to a database on the PC using the download command.
Assuming a recording session has been started and stopped, the instrument should have at least one recording session.
To Download a Recording:
1. Select a recorded session from Recorded session branch of the PEL Network.
2. To download the session, perform one of the following:
■
From the Instrument menu,
select Download Recorded Data.
Figure 64
NOTE: You can also double-click on a recording to download it.
Power & Energy Logger Model PEL 102 and PEL 103
), located at the top of the Status area below the Toolbar.
Figure 62
Figure 63
■
From the Toolbar, click on the Download icon.
or
Figure 65
69