Bluetooth Connection To The Pel; Pairing Using Windows Vista/Windows 7 - AEMC PEL 102 User Manual

3.5.6 Bluetooth Connection to the PEL

The PEL 102 and PEL 103 are designed for a Bluetooth wireless connection to a computer. The Bluetooth connection can
be used to configure the PEL, to prepare a recording session and to download recorded sessions.
To communicate using the Bluetooth connection you will need a computer with Bluetooth capability. Some computers are
supplied with this capability, while others will need to have an external Bluetooth adapter.
The pairing procedure varies depending on your operating system, Bluetooth equipment and driver software.
The default pairing code is 0000 if needed. The pairing code cannot be modified through the PEL Control Panel (DataView
software).
NOTE: The information in the following section is only necessary the first time an instrument is connected.

3.5.6.1 Pairing using Windows Vista/Windows 7

The following example uses the Windows Vista & 7 operating system procedure. The pairing procedure for older versions
of Windows may vary.
1. First, make sure Bluetooth is enabled on the instrument (see § 4.4.2)
2. Connect the USB adapter to the PC.
3. A Bluetooth symbol, similar to this
driver is installed.
4. Double-click on the icon and select "Add a Device".
5. In the "Add a Device" window, select the PEL model you wish to connect to and select "Next".
NOTE: Depending on the Bluetooth setup and operating systems, it may be necessary to enter a passkey to finalize
the instrument connection. If so, the default passkey is: 0000.
20
, will appear in the taskbar (bottom-right side of your computer screen) once the
Figure 10
Power & Energy Logger Model PEL 102 and PEL 103
®