4.4 Configuring the PEL
1. Open the PEL Control Panel by double-clicking the PEL icon
the desktop. The Control Panel will appear.
2. Connect to an instrument (see § 4.2).
3. Open the Configure Instrument dialog box by performing one of the following:
■
From the Instrument menu,
select Configure.
Figure 53
The Configure Instrument dialog box consists of five tabs. Each tab contains a specific set of options associated with
the instrument to be configured.
NOTE: Configuration of an instrument cannot be performed while a recording is in progress. If the instrument is re-
cording, click on the Recording tab in the Configure Instrument dialog box, then click the Stop Recording button.
58
■
From the Toolbar, click on the Add an Instrument icon.
or
Power & Energy Logger Model PEL 102 and PEL 103
that was created during installation, located on
Figure 54