Back Panel Features; Lead Inputs - AEMC PEL 102 User Manual

2.3 Back Panel Features

1
Four magnets (molded into the rubber casing).
2
Six recessed Torx
®
3 Keyhole for attaching the MultiFix multi-purpose mounting clip (see § 2.7).

2.4 Lead Inputs

1
(• •) are the color-coded ID marker insertion locations for the current or voltage inputs.
2
Voltage input connectors (safety banana plug inputs).
3
Current sensor input connectors.
10
screws (for factory service use only).
1
WARNING!
Disconnect all inputs
before opening the
battery compartment
Only replace with 8.4V
NiMH custom battery pack
Power Supply:
110-250V DC/AC 50/60Hz 30VA
MADE IN FRANCE
Figure 2
2
Figure 3
Power & Energy Logger Model PEL 102 and PEL 103
1
2
3
3