Modifying A Connection Type; Reconnecting And Disconnecting An Instrument; Removing An Instrument From The Pel Network - AEMC PEL 102 User Manual

4.3.2 Modifying a Connection Type

To change or modify the connection type (e.g. from USB to LAN), select the desired PEL listed in the PEL Network, then
select the Modify Connection Settings button (

4.3.3 Reconnecting and Disconnecting an Instrument

Disconnecting:
To close the connection between the PEL Control
Panel and the instrument, select the desired PEL
listed in the PEL Network, then select Instrument >
Disconnect Instrument in the main menu.

4.3.4 Removing an Instrument from the PEL Network

A connected instrument will remain in the PEL Network until it is removed.
■
To remove an instrument, select the desired PEL listed in the PEL Network that you want to remove, then click on
the Remove an Instrument icon in the Toolbar, or select Instrument > Remove an Instrument from the main menu.
Power & Energy Logger Model PEL 102 and PEL 103
Figure 50
), located at the top of the Status area below the Toolbar.
Figure 49
Reconnecting:
To reestablish a connection between the PEL Con-
trol Panel and the instrument, select the desired PEL
listed in the PEL Network, then select Instrument >
Reconnect Instrument in the main menu.
Figure 52
Figure 51
57