4. PEL controL PanEL - DataViEW
For contextual information on using DataView, refer to the Help Menu within the software.
4.1 installing DataView
DO NOT CONNECT THE INSTRUMENT TO THE PC BEFORE INSTALLING THE SOFTWARE AND DRIVERS.
Minimum Computer Requirements:
■
Windows XP / Windows Vista & Windows 7 (32/64 bit)
■
2 GB to 4 GB of RAM
■
10 GB of free hard disk space
■
USB port
DataView
is a registered trademark of Chauvin Arnoux
®
Windows
is a registered trademark of Microsoft Corporation in the United States and other countries.
®
USB Flash Drive Install
1. Insert the USB stick into an available USB port (wait for driver to be installed).
2. If Autorun is enabled then an AutoPlay window should appear as shown.
NOTE: If Autorun is disabled, it will be necessary to open Windows Explorer, then locate and open the USB stick
drive labeled "DataView" to view the files on the drive.
3. In the AutoPlay window, select "Open folder to view files".
4. Double-click on Setup.exe from the opened folder view to launch the DataView setup program.
NOTE: If installing onto a Vista based computer the User Account Control dialog box will be displayed. Select the
Allow option to proceed.
38
Find Quality Products Online at:
Inc.
®
Figure 29
GlobalTestSupply
www.
softWarE
®
Power & Energy Logger Model PEL 102 and PEL 103
.com
sales@GlobalTestSupply.com